|  |
Perforated metal planksGratings made of steel, gratings made of stainless steel, gratings made of aluminium, GRP-gratings, gratings fpr sun protection, gratings for coverings, perforated metal planks, pressure-locked gratings, forge-welded gratings
Perforated metal planks are produced from coils in different materials.
After an initial check has been carried out, coils are connected to CNC controlled production lines. Here the required product surfaces are punched and stamped out and the planks are then cut to size with the help of all relevant tooling.
The indicated module "R" should be kept during determination of length. Of course, deviating dimensions are possible, but include extra work during production. The production length of galvanized elements should not exceed 6000 mm. Thickness and production lengths of planks are determined by the applied load and material requested.
The punched planks are formed to a C-profile through a CNC controlled rolling technique.
Necessary cutouts are made according to the data steered by our complete integrated data processing system.
The cutouts are normally supplied complete with a binding bar, having the same height as the perforated metal plank.
Perforated metal planks can be provided with welded kick flats, supplied in accordance with the requirements of DIN EN ISO 14122-3, where the upstand shall be at least 100 mm above the tread area.
Galvanizing according to German standard DIN EN ISO 1461 will be carried out at our galvanizing plant Verzinkerei Sulz GmbH, which is a member of the Lichtgitter Group.
Perforated metal planks can be supplied in lengths of 4000 mm, ex stock.
 Technical data sheet perforated metal planks (PDF)
|
|
